The safety post distributed by FORCIT is an integral component of a personal protective equipment system designed to prevent falls from height while enabling efficient work in demanding field conditions. This fall protection device plays a critical role in ensuring safety, particularly in challenging environments.
FEATURES AND APPLICATIONS OF THE SAFETY POST
The safety post is designed to serve as a single-person anchoring point for fall protection. Only one user may be connected to the post at any given time. Additionally, lifelines—such as ropes or cables—must not be installed between two posts.
Fall protection is required whenever fixed protective measures (such as fences or railings) are not in place and there is a risk of falling from a height greater than 2 meters—or from a lower height if the fall could result in injury. Protection must also be used when working within 2 meters of a crest under the same conditions.
INSTALLATION AND SAFETY
The safety post must be installed in a borehole so that the anchoring point is positioned perpendicular to the hazard area. The borehole must not contain a detonator or bottom charge. To connect to the post, the user must utilize inspected personal fall protection equipment, such as a certified safety harness combined with a rope or retractable fall arrester suitable for the application.
USER COMMENTS
“The safety post has been used multiple times and has proven practical in the field. It is lightweight, weighing only 7.2 kg, and fits conveniently in its designated spot for easy transport by car. Installing the safety post requires some planning to ensure the rope does not interfere with work operations, and it is essential to keep the rope properly tensioned. Overall, the safety post has significantly improved field safety and enabled the effective use of harnesses when working near blast field crests or slopes.”
What is the safety post suitable for?
The safety post is suitable for use as an anchor point for personal fall protection in situations where fixed fall protection is not available and there is a risk of falling.
When should the safety post be used?
The safety post and other fall protection equipment should be used when working at a height of more than two metres, or when working near the edge of a rock face where there is a risk of injury from a fall.
Can more than one person be connected to the same safety post?
No. The safety post is designed to serve as an anchor point for the fall protection of one person at a time.